Intel Advisor provides two workflows to help ensure that Fortran, C, and C++ applications can make the most of modern Intel processors. Advisor contains three key capabilities:
- Vectorization Advisor identifies loops that will benefit most from vectorization, specifies what is blocking effective vectorization, finds the benefit of alternative data reorganizations, and increases the confidence that vectorization is safe.
- Threading Advisor is used for threading design and prototyping and to analyze, design, tune, and check threading design options without disrupting normal code development.
- Advisor Roofline enables visualization of actual performance against hardware-imposed performance ceilings (rooflines) such as memory bandwidth and compute capacity - which provide an ideal roadmap of potential optimization steps.
The links to each capability above provide detailed information regarding how to use each feature in Advisor. For more information on Intel Advisor, visit this page.
Using Intel Advisor on Cori¶
Either the command line tool,
advixe-cl or the GUI can be used. We recommend that you use the command line tool
advixe-cl to collect data via batch jobs and then display results using the GUI
advixe-gui on a login node. The GUI is very responsive if one uses the NX screen forwarding service.
Compiling Codes to Run with Advisor¶
In order to compile code to work with Advisor, some additional flags need to be used. In general, regardless of which compiler is used, one must enable debug symbols (typically by adding the
-g flag to the compiler) and also link applications dynamically, not statically, in order for Advisor to produce useful output.
When using the Cray compiler wrappers to compile codes to work with Advisor, one can enable dynamic linking of an application either by adding the
-dynamic flag to the link line, or by setting the environment variable
CRAYPE_LINK_TYPE=dynamic. (The default link type for the Cray wrappers is static.) If using the Intel MPI compiler wrappers, the default link type is dynamic so no additional flags need to be set.
To compile a code to be profiled by Advisor, one should use the same optimization flags used in production runs of the code (typically
-O2 or higher). For example, when using the Intel compilers with the Cray compiler wrappers, to compile a C code for MPI as well as OpenMP, one could use one of the following commands:
nersc$ cc -g -dynamic -qopenmp -O2 -o mycode.exe mycode.c
Enabling debug symbols via the
-g flag allows Advisor to associate application regions with source code lines.
Launching Advisor with a Single MPI Rank¶
Advisor works best when profiling a single MPI rank. To launch Advisor for an MPI + OpenMP code compiled with the Cray compiler wrappers, and using the basic
survey profiling mode in Advisor, one may use the following commands:
nersc$ salloc -N 1 -t 30:00 -q debug nersc$ module load advisor nersc$ export OMP_NUM_THREADS=8 nersc$ cc -g -dynamic -openmp -o mycode.exe mycode.c nersc$ srun -n 1 -c 8 --cpu-bind=cores advixe-cl --collect survey --project-dir $SCRATCH/myproj -- ./mycode.exe
This will store the results of the analysis performed by Advisor in the
myproj directory on the
$SCRATCH Lustre file system.
Launching Advisor with Multiple MPI Ranks¶
One can use Advisor to profile an application with multiple MPI ranks, albeit with a few limitations. The default behavior in Advisor is to generate a separate profiling database per MPI rank; this is rarely ideal, since the common use case is to see aggregate performance of an application across all MPI ranks. One can add the
-trace-mpi flag to
advixe-cl, which will aggregate profiling data into a single database across MPI ranks, but the aggregation is limited to ranks within a single compute node - Advisor will always generate a separate database per compute node, regardless of the number of ranks used per node.
Another way to use Advisor across multiple ranks is with Slurm's MPMD mode, in which Advisor profiles only a subset of MPI processes. To do so, one may create a plain text file (below called 'mpmd.conf'), containing the following example code:
0 advixe-cl --collect survey --project-dir ./myproj -- ./mycode.exe 1-3 ./mycode.exe
nersc$ srun --multi-prog ./mpmd.conf
An alternative approach to MPMD mode is with a batch script which evalulates a Slurm environment variable to decide which processes are profiled with Advisor. For example, consider the following script, called
#!/bin/bash if [ $SLURM_PROCID -eq 0 ] then advixe-cl --collect survey --project-dir ./myproj -- ./mycode.exe else ./mycode.exe fi
nersc$ srun -n 4 -c 8 ./ascript.sh
Using the GUI to View Results¶
Note that the performance of the XWindows-based Graphical User Interface can be greatly improved if used in conjunction with the free NX software.
Launching Advisor in GUI Mode¶
Log into Cori using the following command:
$ ssh -XY cori.nersc.gov
On the login node, load the Advisor module and then open the GUI:
cori$ module load advisor cori$ advixe-gui
Viewing Results using the GUI¶
Use the "Open Result" button to browse for and open the ".advixeexp" file in the directory that contains the result. Then, you should see a screen similar to the following one which shows a list of top time-consuming loops:
To exit the GUI, simply click the cross on the top left hand corner of the Advisor dialog box.
Roofline Model Integration in Advisor¶
Recent versions of Advisor (2018 and newer) have integrated Roofline model automation into their performance analysis. The new collection type
roofline runs the application twice - once with the
survey analysis and again with the
tripcounts analysis, and combines the profiling information from each of the two separate collections into a single presentation of the cache-aware roofline model. One can then view the roofline data for the application in the Advisor GUI.
Intel has posted a video on Youtube about how to use the roofline functionality in Advisor.
Roofline collection can have large runtime overheads
roofline collection mode in Advisor can cause extremely large runtime overheads, especially its second pass where it runs the
tripcount collection. Intel provides some documentation with tips for reducing the overhead of this collection. Specifically, NERSC has found that adding the additional flags
-no-enable-cache-simulation significantly reduce the runtime overhead.
Below are a collection of example run scripts demonstrating the different features of Advisor. All example assume the profiling data is being collected on a Cori KNL node.
This collection mode identifies general vectorization and threading opportunities in a serial application. The example code provided in
/opt/intel/advisor/samples/en/C++/vec_samples.tgz is suitable for this example.
srun -n 1 -c 4 --cpu-bind=cores advixe-cl -collect survey -project-dir $SCRATCH/Advisor_samples -- ./vec_samples
advixe-cl -report survey -project-dir $SCRATCH/Advisor_samples
ID Function Call Sites and Loops Self Time Total Time Type Why No Vectorization Vector ISA Compiler Estimated Gain Average Trip Count Min Trip Count Max Trip Count Call Count Transformations Source Location Module ______________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ 14 [loop in matvec at Multiply.c:69] 9.348s 9.348s Scalar vector dependence prevents vectorization Multiply.c:69 vec_samples 11 [loop in matvec at Multiply.c:60] 9.328s 9.328s Scalar vector dependence prevents vectorization Multiply.c:60 vec_samples 13 [loop in matvec at Multiply.c:82] 9.232s 9.232s Scalar vector dependence prevents vectorization Multiply.c:82 vec_samples 12 [loop in matvec at Multiply.c:49] 1.160s 29.068s Scalar outer loop was not auto-vectorized: consider using SIMD directive Multiply.c:49 vec_samples 10 [loop in main at Driver.c:155] 0.012s 29.080s Scalar loop with function call not considered an optimization candidate. Driver.c:155 vec_samples 9 [loop in __libc_csu_init at elf-init.c:87] 0s 29.068s Scalar elf-init.c:87 vec_samples
This collection mode identifies threading bottlenecks in an OpenMP code. The example code provided in
/opt/intel/advisor/samples/en/C++/nqueens_Advisor.tgz is suitable for this example.
export OMP_NUM_THREADS=136 export OMP_PROC_BIND=spread export OMP_PLACES=threads srun -n 1 -c 272 --cpu-bind=sockets advixe-cl -collect survey -project-dir $SCRATCH/Advisor_OpenMP -- ./5_nqueens_omp
advixe-cl -report survey -project-dir $SCRATCH/Advisor_OpenMP
ID Function Call Sites and Loops Self Time Total Time Type Why No Vectorization Vector ISA Compiler Estimated Gain Average Trip Count Min Trip Count Max Trip Count Call Count Transformations Source Location Module _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ 4 [loop in setQueen at nqueens_omp.cpp:104] 20.235s 20.235s Scalar loop with multiple exits cannot be vectorized unless it meets search loop idiom criteria nqueens_omp.cpp:104 5_nqueens_omp 3 [loop in setQueen at nqueens_omp.cpp:133] 3.321s 28.714s Scalar loop control variable was found, but loop iteration count cannot be computed before executing the loop nqueens_omp.cpp:133 5_nqueens_omp 1 [loop in main$omp$parallel_for@157 at nqueens_omp.cpp:157] 0s 28.714s Scalar loop control variable was found, but loop iteration count cannot be computed before executing the loop nqueens_omp.cpp:157 5_nqueens_omp 2 [loop in main$omp$parallel_for@157 at nqueens_omp.cpp:158] 0s 28.714s Scalar loop with function call not considered an optimization candidate. nqueens_omp.cpp:158 5_nqueens_omp
The example code provided here is suitable for this example. To perform the roofline analysis on the code, the following example statement can be used:
export OMP_NUM_THREADS=136 export OMP_PROC_BIND=spread export OMP_PLACES=threads srun -n 1 -c 272 --cpu-bind=sockets advixe-cl -collect roofline -project-dir $SCRATCH/Advisor_roofline -- ./3_mmult_omp
tripcounts), one can view the resulting roofline plot in the Advisor GUI.
- mulmv.c.txt: sample code used for the Advisor analysis. It is a matrix and vector multiplication code.
- mulmv-annotated.c.txt: same file as above but with loop annontations for more targeted profiling.
Users profiling their applications with Advisor should be aware of pitfalls described below.
Profiling a statically linked executable¶
If one attempts to profile a statically linked application with Advisor, onen will encounter an error similar to the following:
advixe: Error: Binary file of the analysis target does not contain symbols required for profiling. See the 'Analyzing Statically Linked Binaries' help topic for more details. advixe: Error: Valid pthread_spin_trylock symbol is not found in the binary of the analysis target.
Instead, one should link applications dynamically. With the Cray compiler wrappers this is achieved with the
-dynamic link flag, or by setting the environment variable
CRAYPE_LINK_TYPE=dynamic. For other compilers, the default link type is dynamic, and so no action is necessary.
One can verify that an application is dynamically linked by running the command
ldd on the executable. For example, a dynamically linked executable may show output like the following:
user@cori04:src> ldd toypush linux-vdso.so.1 (0x00007ffd92dc9000) libAtpSigHandler.so.0 => /opt/cray/pe/lib64/libAtpSigHandler.so.0 (0x00002ba99e197000) librca.so.0 => /opt/cray/rca/default/lib64/librca.so.0 (0x00002ba99e3a1000) libmpich_intel.so.3 => /opt/cray/pe/lib64/libmpich_intel.so.3 (0x00002ba99e5a5000) libm.so.6 => /lib64/libm.so.6 (0x00002ba99eb5d000) libiomp5.so => /opt/intel/compilers_and_libraries_2018.3.222/linux/compiler/lib/intel64/libiomp5.so (0x00002ba99ee5a000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00002ba99f235000) libdl.so.2 => /lib64/libdl.so.2 (0x00002ba99f452000) libc.so.6 => /lib64/libc.so.6 (0x00002ba99f656000) libgcc_s.so.1 => /opt/intel/advisor/lib64/libgcc_s.so.1 (0x00002ba99f9fb000) libxpmem.so.0 => /opt/cray/xpmem/default/lib64/libxpmem.so.0 (0x00002ba99fc12000) librt.so.1 => /lib64/librt.so.1 (0x00002ba99fe15000) libugni.so.0 => /opt/cray/ugni/default/lib64/libugni.so.0 (0x00002ba9a001d000) libudreg.so.0 => /opt/cray/udreg/default/lib64/libudreg.so.0 (0x00002ba9a029a000) libpmi.so.0 => /opt/cray/pe/lib64/libpmi.so.0 (0x00002ba9a04a4000) libifport.so.5 => /opt/intel/compilers_and_libraries_2018.3.222/linux/compiler/lib/intel64/libifport.so.5 (0x00002ba9a06eb000) libifcore.so.5 => /opt/intel/compilers_and_libraries_2018.3.222/linux/compiler/lib/intel64/libifcore.so.5 (0x00002ba9a0917000) libimf.so => /opt/intel/compilers_and_libraries_2018.3.222/linux/compiler/lib/intel64/libimf.so (0x00002ba9a0c74000) libsvml.so => /opt/intel/compilers_and_libraries_2018.3.222/linux/compiler/lib/intel64/libsvml.so (0x00002ba9a1207000) libintlc.so.5 => /opt/intel/compilers_and_libraries_2018.3.222/linux/compiler/lib/intel64/libintlc.so.5 (0x00002ba9a2b15000) /lib64/ld-linux-x86-64.so.2 (0x00002ba99df73000)
However, if one attempts to run
ldd on a statically linked executable, the output is an error:
user@cori04:src> ldd toypush not a dynamic executable
Saving profiling database on a GPFS file system¶
The argument to the
-project-dir flag for the
advixe-cl command instructs Advisor where to save the resulting profiling database from the application. On the Cori the database must be saved to a Lustre file system, e.g.,
$SCRATCH. If one attempts to save this database to a GPFS file system (
/project), the profiling process will appear to run correctly, but the final step of Advisor will fail with the following error:
advixe: Error: Data loading failed. advixe: Error: Unexpected internal error / invalid state
Finalization step on KNL nodes¶
The final step of Advisor's profiling process, called "finalization", is a serial process, and runs as a single thread on a single node. Because finalization depends on single-threaded performance of the processor, this step can be very time consuming on Cori KNL nodes. Consequently, it is recommended to add the flag
-no-auto-finalize to the
advixe-cl command when profiling a code running on KNL nodes. This defers the finalization step so that it can be executed, e.g., on a login node which has Haswell processors with much higher single-threaded performance.
One consequence of the
-no-auto-finalize flag is that, when opening the GUI to display the profiling output, Advisor may warn that it cannot find the corresponding source code and object files for the profiled application, since this step is performed during the finalization procedure. The user must then manually add the locations of the directories containing source code and object files, and then 're-finalize' the database from the GUI.